Assigning a Logical Disk to a Storage Group
You can assign an empty logical disk to a storage group.
Notes:
- The logical disk that you want to assign must be empty. Its Size Used value must be zero.
- If you want to reassign a logical disk that is currently in use, you must delete all volumes from that logical disk before you can move it to a new storage group.
- The sector size (4K or 512B) of the logical disk must match the sector size of the storage group.
- Note any relevant requirements in Storage Requirements.
To assign a logical disk to a storage group
- On the PHYSICAL MACHINES page, select node 0.
- Click the Storage tab.
- Select an empty logical disk (its Size Used is 0).
- In the Actions column, click Add to Storage Group
(if the logical disk is unassigned) or Move to Storage Group (if the logical disk is currently assigned to another storage group).
- In the dialog box that appears, click the Storage Group drop down box and select a storage group.
- Click Add to Storage Group or Move to Storage Group.
- On the PHYSICAL MACHINES page, select node 1.
- Repeat steps 2 through 6 above.
On the STORAGE GROUPS page, the new storage group will appear with a non-zero size.